MIL-PRF-9117E
elevated temperature for another 24 hours. If any sample fails, the adhesive shall be
rejected.
5. PACKAGING
5.1 Packaging For acquisition purposes, the packaging requirements shall be as specified
.
in the contract or order (see 6.2). When actual packaging of materiel is to be performed
by DoD personnel, these personnel need to contact the responsible packaging activity to
ascertain requisite packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activity within the Military Department or Defense
Agency, or within the Military Department's System Command. Packaging data retrieval
is available from the managing Military Department's or Defense Agency's automated
packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be
helpful, but is not mandatory.)
6.1 Intended use. The adhesive is intended for use in fuel cell repair work, or for other
general repair work, where aromatic fuel resistance is necessary.
6.2 Acquisition requirements Acquisition documents should specify the following:
.
a. Title, number, and date of this specification.
b. Issue of the DoDISS to be cited in the solicitation, and if required, the specific
issue of individual document referenced.
c. Packaging requirements (see 5.1).
d. When a first article is required (see 3.1 and 4.2).
e. Any additional marking requirements (see 6.3).
f, Material Safety Data Sheets, if required (see 6.4).
6.3 Marking. Unless specified otherwise, (see 6.2), containers and boxes shall be marked
with appropriate precautionary statements in accordance with the manufacturers standard
commercial practice.
6.4 Material Safety Data Sheets When specified (see 6.2) Material Safety Data Sheets
.
will be provided in accordance with FED-STD-313.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business