MMM-A-1617B
the issues of documents not listed in the DODISS are the issues of the
documents cited in the solicitation (see 6.2c).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-D471 -
Rubber Property - Effect of Liquids
ASTM-D1974 -
Methods of Closing, Sealing, and Reinforcing
Fiberboard Shipping Containers, Standard Practice for
ASTM-D5118 -
Fabrication of Fiberboard Shipping Boxes, Standard
Practice for
ASTM-D5168 -
Fabrication and Closure of Triple Wall Corrugated
Fiberboard Containers, Standard Practice for
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-3166
-
Solvents, Cleaning, Cleaning Prior to Application of
Sealing Compound
(Application for copies should be addressed to the Customer Service
Department, Publications Group, SAE, 400 Commonwealth Drive, Warrendale, PA
15096.)
(Non-Government standards and other publications are normally available from
the organizations that prepare or distribute the documents. These documents
also may be available in or through libraries or other informational
services.)
*
2.3 Order of precedence. In the event of a conflict between the text
of this specification and the references cited herein, the text of this
specification shall take precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3.
REQUIREMENTS
*
3.1 Qualification. The adhesives furnished under this specification
shall be products which are authorized by the qualifying activity for listing
on the applicable qualified products list at the time of award of contract
(see 4.3 and 6.3). In addition, the retention of the qualification for the
adhesive on the applicable qualified products list shall be dependent on
periodic verification of continued compliance with the requirements of this
specification (see 4.3.3).
*
3.2 Material. The ingredients used to manufacture these adhesives
shall be suitable in all respects for the purpose intended. The adhesive
shall not cause deterioration of the test substrates.
3.2.1 Characteristics. The material, a one-part solvent dispersed
adhesive, shall be air curing without the use of heat or pressure, and shall
be suitable as received, for application by use of a brush of natural or
synthetic fibers. A flexible continuous film having tackiness, strength,
stretch, adhesion, and aging properties suitable for the intended purpose
shall remain after the evaporation of the solvent. The film shall show no
pock marks or visible evidence of porosity.
3.2.2 Formulation changes. New qualification tests shall be required
if any changes are made to the qualified product or its method or place of
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business