MMM-A-1617B
a.
Qualification inspection (see 4.3)
b.
Quality conformance inspection (see 4.4)
4.3 Qualification inspection. Qualification inspection shall consist
of all the tests and examinations specified in this specification.
4.3.1 Qualification sample. Qualification test samples shall consist
of 4 quarts of each type of adhesive. The adhesive shall be furnished in
containers of the type to be used in filling contracts or orders. Samples
shall be forwarded to the Qualifying Laboratory: Commanding Officer, Naval
Air Warfare Center Aircraft Division, Code 4.3.4.1, P.O. Box 5152, Warminster,
PA 18974-0591. The samples shall be plainly and durably marked with the
following information:
Samples for qualification tests
ADHESIVE, RUBBER BASE, GENERAL PURPOSE
Name and address of the manufacture
Manufacturer's Code No.
Type
Date of manufacture (month and year)
Submitted by (name) (date) for qualification tests in
accordance with MMM-A-1617B under authorization
(reference authorizing letter) (see 6.3)
4.3.2
Manufacturer's data.
4.3.2.1 Test report. Two copies of the manufacturer's test report,
containing complete test data certifying that material submitted for
qualification conforms to this specification, shall be submitted with
qualification test samples. Location and identity of the plant which produced
the samples tested shall also be stated. The contractor shall also furnish
toxicological data (see 3.2.3) necessary to evaluate the adhesive for proposed
use.
4.3.2.2 Instruction sheet. Duplicate copies of the manufacturer's
instructions for use of the adhesive shall be furnished with the qualification
samples (see 3.5).
4.3.3 Retention of qualification. In order to retain qualification of
an adhesive approved for listing on the Qualified Products List (QPL), the
manufacturer shall verify by certification to the qualifying activity that the
manufacturer's product complies with the requirements of this specification.
The time of periodic verification by certification shall be in two year
intervals and shall be initiated by the Government. The Government reserves
the right to re-examine the qualified product whenever deemed necessary to
determine that the product continues to meet any or all of the specification
requirements.
4.4
Quality conformance.
4.4.1 Lot formation. A lot shall consist of all adhesive of the same
type manufactured from the same ingredients, processed at the same time, and
packaged as specified in the contract or order. No lot of adhesive will be
considered for acceptance if more than 30 days have elapsed from the date on
which the actual manufacturing process is completed to the date on which the
lot is made available for selection of samples.
4.4.1.1 Source inspection. Unless otherwise specified, all materials
(each lot) furnished to this specification shall be source inspected before
shipping to the Government.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business